Spray Foam Insulation Chicago

• Best for above grade exterior walls, garage ceilings, foundation walls, rim joists, etc.
• Requires an intumescent barrier in an occupied space or storage space. Closed Cell is a two-Part , medium-density, one-to-one-by-volume spray-applied polyurethane foam.
• Closed Cell production requires the use of an “A” component (ISO) and a blended “B” component (RESIN), which contains ZERO ozone-depleting blowing agents, catalysts, polyols, and fire-retarding materials.
• Closed Cell is an insulation system designed for use in residential applications. Use it in lieu of more traditional forms of insulating materials such as fiberglass, cellulose, or other loose-fill products.
• Typical areas where spray polyurethane foam is applied are exterior walls, vented attics, unvented attic assemblies, between floors, foundations, crawl spaces, HVAC ducts, fluid tanks, and cold storage units.

Closed Cell Spray Foam for advanced temperature control, superior moisture resistance, and added structural support, higher-density spray foam delivers best results. With an even tighter seal and higher R-value per inch, it is ideal for residential, commercial, and industrial projects.

• A Full Moisture, Pressure, and Thermal Barrier at 2mm and with an average R-Value of 6.5-7.4 per inch closed cell spray foam insulation has the best heat retention of any insulation. Consider all the ways to use spray foam on your home, such as transition walls between garage and house, skylights, exterior walls, windows, window wells, box sill, rim joist, sill plate, hvac ductwork in unconditioned cavities or vented attics. Yes, in residential and commercial applications, using spray foam for duct work in unconditioned spaces to creates an airtight duct delivery system with an active thermal barrier. This is superior to interior duct sealing as it provides thermal protection resulting in superior performance of conditioned air delivery. Closed cell foam is also ideal for commercial roof insulation projects.

• An effective treatment of a moist / damp crawlspace is a vapor barrier. This will prevent moisture from the natural ground level and condensation on the ductwork, wood framing, and mold growth as a result of moisture.
• Air penetration into the house at ground level is visible from dust captured by fiberglass insulation, water / moisture stains on nails and cobwebs around air pathways.
• These signs represent the room for improvement in your homes thermal, moisture and pressure barrier of the conditioned living space with a crawl space encapsulation treatment of the parameter.
• Closed Cell Spray Foam as an insulator in crawl spaces outperforms alternatives but is more costly to manufacture and install.

Box Sill Basement Insulation, two-part closed cell spray foam has three advantages over fiberglass, cellulose, sheep’s wool, rockwool, mineral wool, and other types of insulation.

✓ Rim Joist Thermal Barrier - Highest R-Value Per Inch
✓ Rim Joist Moisture Barrier - Prevents Vapor Transfer
✓ Rim Joist Pressure Barrier - Prevents Air Movement